Smart Life
   User manual
List of  programs
Fight Diseases
Reviews
Purchase

About manual

This manual is intended to review the features and capabilities of the device «Smart Life». Before using the appliance, please read the manual.


The designations used in the manual.

Before using, please, examine the designations accepted in this manual:

Примечание Note - notes, usage tips or additional information.
Предупреждение Warning/caution – important information, situations, which can lead to damage or incorrect device work.

→ Next step - sequence of parameters selection or of menu items to perform a certain action.


Contents

Use and safety appliances

Safety warnings and important information on use of the device


Acquaintance with the device

Delivery set

Purpose of the device and general information

Appearance of the device

Technical characteristics of the device

Device batteries

Power supply and built-in battery charger

General description of the main menu items

Item 1: Sets of therapeutic programs. Frequency Voll, Schmidt, Morrel. 0.01 Hz - 100 Hz

Item 2: Therapeutic programs. Frequency Voll, Schmidt, Morrel. 0.01 Hz - 100 Hz

Item 3: Antiparasitic and therapeutic programs. Frequencies Rife, Hulda Clark 0.01 Hz - 1 MHz

Item 4: My programs

Item 5: My sets of programs

Item 6: Schedule programs

Item 7: Settings

Item 8: User menu


Main functions of the device

Functions of the buttons

Turning on of the device

Navigation of the the main menu

Single start the program from global items of the menu

Creation a medical complex in the user menu

Start programs from the user menu

Stop programs in the user menu

Remove programs from the user menu

Indication elements on the screen during reproduction of programs

My programs / manual input of frequencies

Start programs from the "My Programs" item and their addition in the user menu

My sets of programs / saving sets of programs

Schedule programs

Working with the «Settings» item

Designation of icons on the device screen


Use and safety appliances

To avoid danger or violations of the law, and also for ensuring optimum work, observe the following precautions.

Safety warnings and important information on use of the device.
Keep the unit out of the reach of children and pets

To avoid accidents, keep small parts of the device and its accessories out of the reach of children and pets.

Reducing the risk of damage and premature wear 

When using do not compress it, do not put excessive physical and mechanical influences, do not press the buttons too hard. Do not clean the surface of the device abrasive detergents and cleaning products.

Do not use the device if the screen or the casing is damaged

Broken glass or acrylic could cause injury to your hands and face. As a result of damage of casing because of whack operation of the device may be incorrect.

Protect batteries, power supply and USB-cable from damage

• Protect the device from extreme temperatures (below 0 °C / 32 °F or above 45 °C / 113 °F). Too high or low temperatures reduce the capacity and lifetime of the battery..

• Not prevent batteries from contacting metal objects, as this may cause a short circuit the positive and negative contacts of the battery and lead to temporary or permanent violation of it work.

• Do not use a damaged power supply, USB-cable, batteries or accumulators.

Handle the device carefully and sensibly

• Do not disassemble the device: there is a danger of electric shock.

• Avoid getting moisture on the device. Once inside the device, it can cause serious damage and incorrect operation. Do not touch the appliance with wet hands.

• Do not use or store the device in dusty, dirty areas.

• This device is a elaborate electronic device - impacts and rough handling to avoid serious damage and, as a result of incorrect operation of the device.

• Do not expose the device to magnetic fields, it may cause the damage. Do not use carrying cases or accessories with magnetic closures and avoid contact of the device with magnetic fields for a long time.

Do not use near other electronic devices

The device emits radio pulses packages that can interfere not protected from radio frequency electronic devices, such as pacemakers, hearing aids, medical devices, and other electronic devices used at home or in the car.

Correct disposal of this product

The device and its electronic accessories (Power supply and USB-cable) at the end of their useful life cannot be disposed of with household waste. To avoid harm to the environment and human health dispose your device and its electronic accessories separately from other waste. Information about the location and method of disposal of the device in accordance with the rules of conservation can be obtained from the appropriate government agency.

Correct disposal of batteries

The battery used in this device should not be disposed together with other household waste at the end of life. Please separate batteries from other types of waste and recycle them through your local, free battery return system.

Denial of responsibility

User fully assumes all obligations regarding respect careful treatment for the device, its correct operation and compliance with all requirements and guidelines on the use of resonant frequency therapy.

The manufacturer declines all responsibility in case of improper use by the user, and the use of its capabilities without the advice of a doctor.

Acquaintance with the device

In this part of the manual introduces you to the description of the main items and subitems of the device menu, as well as learn about its purpose and appearance.


Delivery set

The package includes the following components:

• device  «Smart Life»;

• electronic user manual;

• warranty card 

look there

;

Components of the package may vary depending on the accessories available in your region. If necessary accessories are available from local dealers Smart Life.

Accessories supplied with the device best suited for its operation.


Purpose of the device and general information

Device «Smart Life» - a programmable electromagnetic wave generator that provides contactless antiparasitic and rehabilitation therapy using the resonance frequencies on methods Rife, Clark, Voll, Schmidt, Morrel, etc.

Contactless method using the resonant frequencies of the electromagnetic waves showed very high efficacy, availability and ease of use, has virtually no contraindications, can be used both as monotherapy and in combination with any drugs.

In memory of the device has recorded more than 4,550 programs with the possibility of adding.

If you add a new manufacturer of therapeutic frequencies and programs in the base of the device, the user can update it for free over the Internet.


Примечание All programs and frequency of the item «Antiparasitic and therapeutic programs. Frequencies Rife, Hulda Clark. 0.01 Hz-1 MHz», recorded in the memory of the device correspond CAFL 2009, ETDFL 2014. 

Appearance of the device

The top panel contains the following items: 

Примечание
On the bottom panel contains the following items:

Примечание

Technical characteristics of the device:

 
  • Range of modulating frequencies – 0,0015 Hz – 1,3 MHz
  • Step set
    Depth of modulation – 100%
    up of modulating frequencies over the entire range – 0,0015 Hz
  • Duty cycle – 50%, 60%, 70%
  • Carrier frequency – 27 MHz
  • Radiation power, not less – 23dBm (200 mW).
  • Color display with a resolution of — 176х132 pixels.
  • Dimensions – 105х74х27mm.
  • Continuous operation - not limited. 
  • Self-powered – alkaline batteries or Ni-Mh batteries, size AA, 2 pcs.  
  • External power supply and charge batteries through mini USB - 5V.  
  • Monitoring of battery discharge each element separately by two independent channels.

 

 

 

 

 

 

 

 

 

 

 

 

Device batteries

For power supply of the device used NiMH batteries or alkaline batteries size "AA" - 2 pcs.
For stable operation of the device, use a battery with low internal resistance ensure reliable operation of the device with a pulse energy consumption.
Recommended actual capacity of battery - 2500mAh, ensures continuous operation for at least 56 hours, 2000mAh capacity - of not less than 48 hours. 
Ni-MH AA-size batteries are widely distributed, always available for sale, and is able to operate at temperatures up to -20 ° C.  
The device has a function to automatically switch from the internal power supply to an external source. 
The device has the option to charge or replace the batteries without having to interrupt the operation of treatment programs, provided external power supply.
Примечание Recommended batteries with low self-discharge, eg: 
Panasonic eneloop 2000mAh, Fujitsu 2000 mAh, DURACELL 2450mAh, VARTA 2000 - 2700 mAh, and the like.
Using rechargeable batteries with high internal resistance can lead to a sharp drop in the voltage across the battery terminals, disruptions in the power supply circuit and unstable work device at partial discharge batteries.
To charge the batteries out of the device, it is recommended to use a battery charger to ensure continuous operation and gentle care of your battery pack, such as: 
 
  • EXTRADIGITAL BM-100
  • EXTRADIGITAL BM-200
  • Technoline BC-700
  • Technoline BC-1000 
And other with the function «minus delta voltage» (-ΔV), which controls the end of charge voltage drop 
5-10 mV, when the battery reaches its maximum capacity.

Power supply and built-in battery charger

For stationary use, the device can use an external stabilized power supply voltage of 5 V, 500 - 1000 mA (supplied or optional). 
The device has a built-in battery controller and, if necessary, you can charge the batteries directly into the device by connecting it to a power source.
Features built-in charger:
Battery charge current is 240 mA and carried for 14 hours, and is designed for slow charging the battery capacity 2500 - 2700 mAh, then the charge is automatically disabled. In this mode, the battery charge provides durability.
If the user place the batteries into the battery module of smaller volume, in this case it is necessary to calculate the charging time for a specific capacity and unplug the charger manually. 
To avoid damage of the battery by reason of constant recharging, the battery charge is turning on only if the low battery indicator on the monitor lights up red. 
During battery charging on the top panel lights the red indicator, marked the «CHARGE». 
If user place the old batteries with high internal resistance, that capacitance significantly lost, defective or place exhausted batteries, the device will ignore to charge them.
Предупреждение Warning! Power supply from the unregulated voltage over of 5 volts can lead to failure of the device!

General description of the main menu items

When you turn on device the displays menu is divided at eight global items: 
   
  • 1. User menu
  • 2. Sets of therapeutic programs  
  • 3. Therapeutic programs 
  • 4. Antiparasitic and therapeutic programs
  • 5. My programs
  • 6. My sets of programs
  • 7. Schedule programs
  • 8. Settings
Примечание Therapeutic and antiparasitic program in items 2 and 3 are ordered according to areas of medicine in alphabetical order. 
In item 3, the device displays the full name of the program in English languages.
Long names of the programs take the form of scrolling text at the cursor.

Item: “Sets of therapeutic programs”.

Frequency Voll, Schmidt, Morrel. 0.01 Hz - 100 Hz  

This menu contains the program for the treatment of the following diseases:

• Allergy

• Angina, laryngitis

• Arthritis, arthrosis

• Bronchial asthma

• Bronchitis

• Cholelithiasis

• Clearance of the organism

• Colitis

• Cosmetology

• Cystitis

• Diabetes mellitus, 2 type

• Diseases of the spine

• Dysmenorrhea

• Extension of the male libido

• Frequently ill children

• Gastritis

• Hypertension

• Insomnia

• Mammary glands

• Menopause

• Myoma

• Obesity

• Otitis

• Peptic ulcer

• Prostate (gland) adenoma

• Prostatitis

• Pyelonephritis

• SARS

• Sets for the regulation of vital systems

• Sinusitis

• The program for the study

• Urolithiasis

• Varicose veins

• Vision

Примечание In this item, are ready sets consisting of the frequencies of different therapeutic programs.

Sets of therapeutic programs are focused on solving the most common problems, and aimed at the restoration of organs and systems after or during the antiparasitic therapy.

By default, the operating time of each frequency in the set - 5 min.

Program with the numbers 1, 2, etc. - a logical continuation of the program that divided into parts.

Предупреждение Important: During therapy by programs from item "Sets of therapeutic programs", the first program in the medical complex should always be "Activation of defense functions" and the last program - "Deep rectification/clearance of the organism" from subitem "Sets for the regulation of vital systems".

During therapy by programs from "Sets of therapeutic programs" must provide a daily intake of clean water for at least 30-40 ml per 1 kg of weight!

Item: “Therapeutic programs”.

Frequency Voll, Schmidt, Morrel. 0.01 Hz - 100 Hz

Programs in this item are organized according to the areas of medicine in alphabetical order:

• 7 chakras

• Acupunctur-neuralgia

• Acupunctur-thyroid gland

• Allergology

• Anatomy, physiology and histology

• Cardiology and cardiovascular system

• Dentistry

• Dermatology and cosmetology

• Endocrinology

• ENT

• Gastroenterology

• General energy, vitalization

• Gynecology and Obstetrics

• Headaches

• Hematology and Immunology

• Hepatology

• Infectious diseases

• Lymphology

• Mammalogy

• Narcology

• Neurology

• Oncology

• Ophthalmology

• Phlebology

• Physiological effects

• Proctology

• Psychology and Psychiatry

• Pulmonology

• Rheumatology

• Sexology

• Surgery, traumatology and arthrology

• Symptoms and syndromes

• Urology and Nephrology

• Vertebrology

Item: “Antiparasitic and therapeutic programs”.

Frequencies Rife, Hulda Clark. 0.01 Hz - 1 MHz

Program in this item are arranged in accordance with the areas of medicine in alphabetical order:

• Acarology

• Allergy

• Arthrology

• Cardiology, Cardiovascular diseases

• Dermatology

• Detoxification, Toxicology

• Diseases caused by bacterias

• Diseases caused by helminths

• Diseases caused by mycoses

• Diseases caused by protozoan

• Diseases caused by viruses

• Effects

• Endocrinology

• Frequency of homeopathic preparations

• Gastroenterology

• Gynecology, Mammology

• Hematology

• Hepatology

• Immunology

• Infectious diseases

• Influenza

• Lymphology

• Muscle frequencies

• Neurology

• Oncology

• Ophthalmology

• Otolaryngology

• Pain

• Psychiatry

• Pulmonology

• Rheumatology

• Stomatology

• Surgery, traumatology

• Symptoms, first aid

• Syndromes, Congenital disorders, Hereditary diseases

• Urology, Nephrology, Andrology

• Vertebrology

• Veterinary medicine

Предупреждение Important: The main programs in this item are the programs located in the "Diseases caused by bacteria / helminths / mycoses / protozoan / viruses"».

Programs from other subitems are in addition to the main program. Using only the additional programs as independent (main) for symptomatic therapy may be ineffective.

Примечание Creation a medical complex programs should be based on the vegetative resonance test conducted by qualified personnel with extensive experience, as well as the data obtained by PCR, ELISA, etc.

Chance to make a correct medical complex of antiparasitic programs only on the basis of symptoms, without conducting clinical assays - minimal and usually does not lead to positive results.

Complexes treatment programs drawn up on the basis of the diagnosis of doctors who are not specialists in the field of frequency-resonance therapy, may have low efficiency.

Предупреждение Important: When an antiparasitic therapy, the first program in the medical complex program should be "Drainage" from "Detoxification, Toxicology" subitem, and the last program in the medical complex program should be "Detox and lymphs» from the same subitem.

During antiparasitic therapy is imperative daily intake of clean water for at least 30-40 ml per 1 kg of body weight. This will help avoid intoxication decomposition products of dead parasites.

Explanation of abbreviations used in item 3»:

• Programs, which name is added of the designation «1», «2», «3», «4» often contain newly discovered frequencies and can be most effective in some cases.

• Programs, which name is added of the designation «V» - Vega sets of frequencies, originally developed by John Garvey, as well as the program of his successor Peter Kapetanakosa (www.carolinahealthcenter.com).

• Programs, which name is added of the designation «TR» - developed in the TrueRife.com

• Programs, which name is added of the designation "secondary" and "tertiary" - these are the sets of frequencies that may be useful to increase the effects of a main set of frequencies or to solve less common causes of disorder.

• Programs, which name is added of the designation "complex", "general" is a comprehensive set of frequencies that include all or nearly all frequencies for this disease.

• Programs, which name is added of the designation «part1, part2, etc.», are a continuation of the program is divided into parts. In the "User Menu" you need to record all the parts of the program in order.

• Programs, wchich name is added of the designation «HC», developed by Hulda Clark, as well as researchers from the 9th and private clinics in Germany, and include in their set of frequencies up to 1 MHz.

Item: “My programs”
In this item, stored program with manual entry of frequencies. Total 50 programs with 25 frequencies each.
Item: “My sets of programs”

This item is designed to store and run a created a sets of programs. Only 9 sets of 60 programs each.


Item: “Schedule programs”

This item is designed for the storage and remove schedule programs, which launched on a user-defined time.


Item: “User menu”

This item is designed to creation the current medical complex, run it or save in sets.


Item: “Settings”

In this item are located additional settings of the device (manual input frequency, clear menu, set the time, adjust the brightness of the display, control beeps and cyclical programs).

Main functions of the device

Functions of the buttons

The top panel contains the following keys: 
Предупреждение - on / off the device or exit from sleep mode (during program execution).
Предупреждение - returns to the previous menu level; canceling.
Предупреждение - start / stop program. 
Предупреждение– navigation buttons to navigate through the menu (up / down). 
Предупреждение - entrance to the menu items; add / remove programs; confirm the action.  

Turning on of the device

Before using the device, insert batteries or rechargeable batteries that are provided by delivery set, or connect it to the power network using a power supply and USB-cable. 
Примечание To turn the device on, press and hold for 3 seconds key , at this moment on the top panel will blink blue LED. 
Предупреждение If the device does not turn on, check for correct placement of batteries, clear their contacts, as well as check the battery level. 
If after turning the device will not start any program, or the time between pressing the button will exceed 60 seconds - it will automatically turn off.

Navigation of the the main menu

After turning on displays the main menu, which consist of eight global items:

1. «User menu»

2. «Sets of therapeutic programs. Frequency Voll, Schmidt, Morrel. 0.01 Hz - 100 Hz».

3. «Therapeutic programs. Frequency Voll, Schmidt, Morrel. 0.01 Hz - 100 Hz».

4. «Antiparasitic and therapeutic programs. Frequencies Rife, Hulda Clark. 0.01 Hz - 1 MHz».

5. «My programs».

6. «My sets of programs».

7. «Schedule programs».

8. «Settings».

To navigate between items of the main menu, use the buttons 

Предупреждение

.

To enter the selected item, press 

Предупреждение

.

To return to the previous menu level, press 

Предупреждение

.

Single start the program from global items of the menu 

Примечание Before using of the device please read the information in the section "General description of the main menu items" (p. 9), for understanding of where and what programs is located and freely orient in the creation of a medical complex.

For a single start the desired program, follow these steps:

1. Turn on the device by pressing the button 

Предупреждение

.

2. Using the navigation buttons 

Предупреждение

, select the global item of the main menu and press 

Предупреждение

 for entrance.

3. Then, using the navigation buttons 

Предупреждение

, select the appropriate subitem and press 

Предупреждение

 for entrance.

4. Place the cursor on the desired program and press 

Предупреждение

, holding it (3 sec.) to start the program.

Creation a medical complex in the user menu

At creation the medical complex in the user menu, you can load up to 60 programs.

To add a program to the user menu, follow these steps:


1. Turn on the device by pressing the button

Предупреждение

 .

2. Using the navigation buttons

Предупреждение

, select the global item of the main menu and press

Предупреждение

 for entrance.

3. Then, using the navigation buttons

Предупреждение

, select the appropriate subitem and press

Предупреждение

 for entrance.

4. Place the cursor on the desired program and press

Предупреждение

 to add it to the user menu.

5. Using the button

Предупреждение

 , go back to the desired level menu to add the following program.

Примечание Adding each subsequent program is always made at the end of the list of medical complex and accompanied by a short beep. 

Start programs from the user menu

After creating a medical complex in the user menu, you can run programs or remove their.


In order to run the program from the created medical complex follow these steps:

1. Turn on the device by pressing the button

Предупреждение

 .

2. Using the navigation buttons

Предупреждение

, select the item «User menu» and press button 

Предупреждение

3. Using the navigation buttons

Предупреждение

 , position the cursor on the program, which will be reproduced medical complex, press

Предупреждение

, and holding it (3 sec.) to start the program.


Примечание By default, the programs in the user menu reproduce cyclically, until you stop them manually or disable the function of the cyclic recurrence in the "Settings" menu..

Stop programs in the user menu

To reduce power consumption in the device has a function of "sleep mode". Power save mode turning on after 10 seconds from the start of reproducing of the selected program, and the screen of the device is switched off.


That what device continues to reproduce selected program, signals blink blue LED every 5 seconds.


In order to stop the execution of programs medical complex user menu, follow these steps:

1. Press button once

Предупреждение

 to exit the "sleep mode" and the screen will display the progress of the current program.

2. Press button

Предупреждение

 , and holding it (3 sec.) to stop the execution program.


Remove programs from the user menu

To remove a program from the created medical complex follow these steps:


1. Turn on the device by pressing the button

Предупреждение

 .

2. Using the navigation buttons

Предупреждение

, select the item «User menu» and press button 

Предупреждение

3. Using the navigation buttons

Предупреждение

, position the cursor on the program, which will be removed.

4. Press button

Предупреждение

 and holding it about 2-3 seconds to delete the selected program.

5. If you want to remove several programs, repeat steps 3 and 4.


Примечание Remove a program in the user menu is accompanied by a short beep.

If you want to remove all programs in the user menu, use the menu clearing in the "Settings" item.

Indication elements on the screen during reproduction of programs

During the reproduction program, the display device displays the following data:


1. Full name of the program (1).

2. Current frequency in Hz (2).

3. Current frequency time reproduction in minutes. (3)

4. Number of the frequency list (4).

5. Total time remaining until the end of the work programs of the whole complex (5).

6. The time remaining until the end of the current program of work (6).

Примечание

My programs / manual input of frequencies

In this item, stored program with manual input frequency. Total 50 programs with 25 frequencies each. Adding programs in this item is carried out through a global menu "Settings" item.


In order to enter the frequency manually, follow these steps:


1. Turn on the device by pressing the button

Предупреждение

 .

2. Using the navigation buttons

Предупреждение

, select the «Settings» item and press button

Предупреждение

 for entrance.

3. Using the navigation buttons

Предупреждение

, position the cursor on the «Enter frequency» item and press button

Предупреждение

 for entrance.


After that the dialog box appears manual input frequency, which will have the following elements:


• Number of program (1).

• Default time for frequency (2).

• Frequency number on a program (3).

• Time frequency (4).

• Set the frequency in Hz (5).

• Output field for the error (6).

Примечание


4. Set the parameters in each element of the display using the following algorithm:

Предупреждение

 (select editable display element) →

Предупреждение

 (start editing) →

Предупреждение

 (specify the required values) →

Предупреждение

 (finish editing).


5. To save your settings by using the navigation buttons, move the cursor to field «Save» and press

Предупреждение

 ; press

Предупреждение

 for exit.


Примечание Main errors in manual input frequency:

1. Do not put the default time.

This parameter must be entered without fail otherwise the program will not allow to save set frequency. Error display on the screen: «

Предупреждение

 Default time».

2. Invalid ordinal number of frequency.

The program does not allow to save the entered data, if the ordinal number is not with increments 1. I.e. after the ordinal number 1, should be number 2, not 3, etc. Error display on the screen: «

Предупреждение

 Frequency number».

3. Do not set the parameters of the frequency in Hz.

The program does not allow to save the entered data, if the frequency is equal to "0". Error display on the screen:«

Предупреждение

 Enter frequency».


Предупреждение An example of correct input frequency: the frequency of 4983 Hz is shown as 0004983.000 Hz frequency 2.65 - 0000002.650 Hz.

Start programs from the "My Programs" item and their addition in the user menu

All manually entered frequencies are stored in the "My Program" and can be run directly from this item or added to the medical complex in the user menu.

To run the program directly from the "My programs" item, follow these steps:


1. Go to "My programs" from the global menu.


2. Use the navigation keys to select the desired program and press 

Предупреждение

 to start it.

To add a program from the "My programs" item in the user menu, follow these steps:


1. Go to "My programs" from the global menu.


2. Use the navigation keys to select the desired program and press

Предупреждение

 to add it.

My sets of programs / saving sets of programs

Save a sets of programs is carried out from the user menu.


In order to save the program in a set, follow these steps:


1. Add the programs in user menu according to their reproduction.

2. From the User menu, press simultaneously two keys of the device:

Предупреждение

  (first press) and

Предупреждение

 .After that opens a dialog box "Save set" and the cursor will be set by default to the "Set number" field» (1).

3. Press

Предупреждение

 to start editing data and, using the navigation buttons

Предупреждение

 enter the number of the set (1 to 9).

4. Press

Предупреждение

 to finish editing the field and using the navigation buttons move to the item in the dialog box "Save" (2).

5. Press

Предупреждение

  for save.

6. To exit the dialog box, press  

Предупреждение

.


After save a medical complex to set of programs, you can run it from the menu "My sets of programs" to do this, follow these steps:


1. Go to the "My set of programs" menu item and using the navigation buttons

Предупреждение

 select the desired set.

2. Press button

Предупреждение

 to view programs in the set.

3. Using the navigation buttons, position the cursor on the program, which will be reproduced programs set, press button

Предупреждение

 , and holding it about 3 seconds.

Schedule programs

This item is designed for the storage and remove schedule programs, with launch on a user-defined time. 
Примечание To maximize the effectiveness of therapeutic programs is recommended to use them according to the time of organs activity. 
Предупреждение This option is only available for programs from the item "Sets of therapeutic programs" and "Therapeutic programs". 
Programs that the user writes in the "Schedule programs" item will run automatically at a specified time. If the during alarm time for the start of the schedule program will run any other program, then this program is suspending its work and, at the conclusion of "schedule program", its execution will continue. 
If the device is turned off, and if it's time to work the schedule program, the device is turned on, and after completion of the program will automatically shut down before the next schedule program.
To add a schedule program, follow these steps:
1. Go to the global menu "Sets therapeutic programs" or "therapeutic programs". 
2. Select the desired program using the navigation buttons Предупреждение, press simultaneously two keys of the device. (first press) Предупреждение , and, Предупреждение . After that opens a dialog box "Time for program." By default the cursor position will be in the time edit field (1).
3. Press Предупреждение  to start editing and using the navigation keys, set the required hours and minutes. To switch between the digits, use the Предупреждение .
4. Press Предупреждение   to finish editing and using the navigation buttons move the cursor in the dialog field "Set" (2).
5. Press Предупреждение  for save, after that press Предупреждение  for exit from dialog box. 

Appearance dialog box for storing schedule programs:

Примечание

For this item are also available functions to run programs and their remove. 
In order to run the program at any time from the menu "Schedule programs" follow these steps:
1. Go to the menu "Schedule programs". 
2. Using the navigation buttons Предупреждение select desired program and press  Предупреждение for start it.
In order to remove the program from the menu "Schedule program" follow these steps. 
1. Go to the menu "Schedule programs". 
2. Using the navigation Предупреждение select program, which you want to remove and press Предупреждение , holding it about 2 seconds. 
Примечание Main errors when you add a schedule program:
1. Wrong start time of the program. The device does not allow to set the program on time, which is already in use by another program. For example, the previous program is set to 12-00 and lasts 1 hour. When you set the following programs at 12-30, error display on the screen: « Time is busy»». 
2. Current program ends later than the next begins, previously stored.
For example, if the user set the program on 12-30 with a duration of 40 minutes, and the previously stored program should begin in 13-00, error display on the screen: « Предупреждение  «Wrong duration»». 

Working with the "Settings" item»

In this item is located additional settings of the device:


• Beeps control

• Control parameter of cyclically programs

• Duty cycle

• Manual input frequency

• Time setting

• Adjustable capacity battery

• Adjustable display brightness

• User Menu clearing

• Schedule Menu clearing

• Default settings


In order to enable / disable the beeps, follow these steps:


1. From the «Settings» item and using the navigation keys

Предупреждение

 move the cursor to «Sound».

2. Press button

Предупреждение

 to enable / disable beeps.


To enable / disable cyclically reproduced programs, follow these steps:

1. From the «Settings» item and using the navigation keys

Предупреждение

 move the cursor to «Cyclic recurrence».

2. Press button

Предупреждение

 for enable/disable cyclically reproduced programs.


To adjust the duty cycle, follow these steps:


1. From the «Settings» item and using the navigation keys

Предупреждение

, move the cursor to «Duty cycle».

2. Press button

Предупреждение

 to change the duty cycle 50%, 60% or 70%. The duty cycle will vary cyclically.


To adjust the capacity battery (charge mode), follow these steps:


3. From the «Settings» item and using the navigation keys

Предупреждение

 move the cursor to «Adjustable capacity battery». .

4. Press button

Предупреждение

 to change the capacity of your battery amongst value: 1500mAh, 2000mAh or 2500mAh. The capacity battery will vary cyclically.


To adjust the brightness of the display, follow these steps:


1. From the «Settings» item and using the navigation keys

Предупреждение

move the cursor to «Brightness LCD».

2. Press button

Предупреждение

 to change the display brightness. The brightness will vary cyclically.


To clear the user menu/schedule menu, follow these steps:


1. From the «Settings» item and using the navigation keys

Предупреждение

 move the cursor to «User Menu clearing»/»Schedule Menu clearing»


2. Press button

Предупреждение

 to clear the user menu/schedule menu. In this case, all the programs from the user menu/schedule menu, will be erased.


Set the time in the device
Предупреждение If time is not set, or is set incorrectly, the program from the menu "Schedule program" will not reproduced correctly.

To set the time, follow these steps:


1. From the "Settings" item and using the navigation keys

Предупреждение

 move the cursor to «Clock setting» and press

Предупреждение

 . After that opens a dialog box «Time setting». By default the cursor position will be in the time edit field (1).

2. Press

Предупреждение

 to start editing and using the navigation keys, set the required hours and minutes. To switch between the digits, use the

Предупреждение

.

3. Press to finish editing and using the navigation buttons move the cursor in the dialog field "Set" (2).

4. Press

Предупреждение

 for save, after that press

Предупреждение

 for exit from dialog box.


Примечание If you are not using to run programs on a schedule, then set the current time, you can skip.
Appearance dialog box time setting:

Примечание

Designation of icons on the device screen

On the screen of the device, there are two fields time indication.

In field «1» displays the following icons and their meanings:

1. 

Примечание 

- icon representing the current time, which is specified in hours and minutes beside it.

2.

Примечание

 - icon representing the time execution of all programs in the user menu.

3.

Примечание

 - icon representing the time at which the schedule program is set.


In field «2» displays the following icons and their meanings:


1.

Примечание

 - icon representing the time of the current program (or program on which the cursor), which is indicated in minutes beside it.

Appearance screen of the device with time icons: : 

Примечание